Part Gallery
A showcase of our manufacturing capabilities across stampings, over-molded assemblies, and cable assembly production.
Hydraulic Fitting with O-Ring Grooves
Precision-turned hydraulic/pneumatic fitting with triple O-ring grooves, threaded nose, and hex head. Machined from stainless steel bar to tight groove width and diameter tolerances for reliable sealing.
Machined Spool Components — Batch
Production batch of CNC-turned stainless steel spool components with concave waist profile. Complex turning profile produced efficiently on Swiss-type lathes with consistent dimensions throughout.
Precision Pin & Cartridge Assembly
Pair of CNC-turned stainless precision pin assemblies featuring threaded shank, knurled body, and conical tip with cross-slot. Tight runout and surface finish to OEM drawing requirements.
Precision Housings & Anodised Disc Flanges
Assorted precision components for electronics assemblies: CNC-machined chrome valve body, injection-molded plastic spherical and cylindrical housings, and anodised red/blue disc flanges machined to close bore and face tolerances.
CNC Machined Stainless Fittings & Couplings
Family of CNC-turned and milled stainless steel fittings for electronics enclosures and fluid/gas systems: threaded male connector, ported flange body, black anodised clamp ring, and threaded coupling — all produced to OEM drawing.
Multi-Bore Aluminium Indexer Plate
CNC milled aluminium indexer/turret base plate with precision-bored pocket array, slotted mounting feet, and threaded stud assembly. Complex 5-axis milling with tight positional tolerances on all bores.
Aluminium Block Housings & Mounts
CNC milled aluminium structural housings with precision-bored through holes and tapped mounting features. Produced from solid billet to tight squareness and bore position tolerances for electronics and sensor mounting applications.
CNC Milled Stator Carrier
Complex CNC milled aluminium stator carrier with radial slot array, lobe tabs, and central bore. Produced for motor and generator electronics assemblies with tight slot-to-bore concentricity and angular pitch tolerances.
Aluminium Bearing Block & Cylindrical Housing
Pair of CNC milled aluminium housings: a flanged bearing block with precision-threaded bore and counterbore mounting faces, and a multi-groove cylindrical body with cross-drilled ports — both machined to OEM specifications.
Aluminium Heat Sink Panel
Extruded and machined aluminium heat sink panel with high-density fin array and machined mounting ears. Produced for electronics cooling applications where fin pitch, flatness, and mounting hole position are critical to thermal performance.
Turned Bushings — Batch Production
High-volume production batch of short precision-turned stainless bushings and sleeves in component tray. Tight bore diameter, OD, and length tolerances maintained across the full production run.
Hex Fittings with Insert — Batch
Batch of hex-body chrome fittings assembled with white plastic rod inserts, presented in production tray. Metal bodies CNC turned to close tolerances; inserts assembled to OEM specification.
Brass Threaded Insert Bushings — Batch
Batch of brass CNC-turned threaded cylindrical inserts with flanged head, arranged in segmented production tray. Thread form and OD tolerances consistent throughout the batch.
Brass Hex Knurled Fittings — High Volume Batch
High-volume production batch of brass hexagonal knurled fittings filling a full parts tray. Consistent hex across-flat, thread, and knurl dimensions maintained across thousands of pieces on CNC sliding head lathes.
Multi-Step Connectors — Segmented Tray
Batch of precision CNC-turned multi-step stainless connectors individually trayed for inspection and dispatch. Step diameters and overall length held to OEM drawing across all pieces.
Hex-Body Slotted Fittings — Batch
Batch of chrome hex-body fittings with internal collet slot feature, arranged in production tray. Hex across-flat and internal slot dimensions held to OEM tolerances for reliable tool engagement.
Brass Flanged Pin Assemblies — Batch
Production batch of CNC-turned brass flanged pin/stem assemblies in parts basket. Flange OD, stem diameter, and length tolerances consistent across the full batch for press-fit assembly applications.
Diamond-Knurled Domed Caps — Batch
Batch of large aluminium diamond-knurled domed cap nuts in parts basket. CNC turned with full-face knurl and consistent dome profile for hand-tightened enclosure and panel fastener applications.
Aluminium Fork Yoke Components — Batch
Batch of CNC turned and milled aluminium C-channel fork yoke components. Bore, slot width, and overall length tolerances maintained throughout the batch for linkage and clevis pin applications.
Conical-Tip Stainless Pins — Batch
High-volume batch of CNC-turned stainless steel conical-tip pins in parts basket. Tip angle, shank diameter, and length held to OEM tolerances across thousands of pieces.
Brass Threaded Insert Bushings — Segmented Tray
Batch of brass CNC-turned threaded cylindrical inserts with internal bore and flanged head, individually trayed. Thread form and bore diameter consistent throughout the batch.
Spool Components with Copper Washers — Batch
Batch of CNC-turned stainless spool components assembled with copper seating washers, in parts basket. Spool profile and washer seat dimensions consistent across the full production run.
Aluminium Turned Disc Flanges — Batch
Production batch of large CNC-turned aluminium disc flanges with smooth face and step. OD, face flatness, and step diameter tolerances consistent across all pieces in the batch.
Stainless Shoulder Bolts — Batch
Batch of CNC-turned stainless shoulder bolts with ground shank and threaded end in parts basket. Shoulder diameter, length, and thread form held to precision tolerances for bearing and pivot pin applications.
UAV Motor Bell Housing
Large black hard-anodised aluminium motor bell housing with ribbed outer profile and bolt-circle mounting flange. CNC turned and milled from 6061-T6 aluminium to tight cylindricity and flatness tolerances. Ribbed exterior provides passive heat dissipation for high-power UAV propulsion motors.
UAV Motor Rotor Disc — Stator Tooth Pattern
Precision CNC-turned and milled grey aluminium rotor disc with radial stator tooth array and central hub bore. Stator slot dimensions, bore concentricity, and face flatness held to close tolerances for low-vibration, high-efficiency UAV brushless motor assembly.
UAV Motor Rotor — 12-Spoke Cooling Disc
Large grey anodised aluminium UAV motor rotor with 12 aerodynamic swept spoke cutouts, integral stator teeth, and central boss. CNC milled from solid billet to OEM drawing with tight spoke width, bore, and flatness tolerances. Spoke geometry provides airflow for active motor cooling at high RPM.
UAV Component Assortment
Representative assortment of CNC-machined UAV and drone components: motor bell housing, spoke rotor disc, retention ring, threaded shaft assembly, knurled coupling, aluminium link bracket, and brass fittings. Demonstrates the breadth of precision turning and milling capability JHY Group delivers for UAV drivetrain and airframe applications.
Robotic Motor End Plate
Precision die-cast aluminium motor end plate for robotic joint actuators. Machined bearing seat and mounting holes to tight tolerances.
Precision Machined Shafts
Ground and finish-machined stainless steel shafts and spacers for robotic arm linkage and joint assemblies. Supplied in matched sets.
Brass Machined Connectors
CNC-turned brass connectors and fittings for robotic wiring harness and pneumatic systems. Threaded and assembled to OEM specifications.
Robotic Motor Housing Cover
Machined aluminium motor housing cover with precision-bored bearing register and bolt pattern for collaborative robotic arm joints.
CNC Sliding Head Lathe Production
Citizen sliding head CNC lathes running in our Taiwan facility. Multi-axis Swiss-type turning enables complex profiles, cross-holes, and threads in a single cycle.
High-Volume CNC Turned Pins
High-volume production of precision turned stainless steel pins and studs on CNC sliding head lathes. Tight diameter and length tolerances maintained across full production runs.
Multi-Groove Threaded Fitting
Polished multi-groove threaded connector assembly with bright chrome finish. CNC turned from bar stock with thread rolling for superior surface and fatigue resistance.
Machined Rod End / Eye Fitting
CNC-turned stainless steel rod end fitting with knurled shank and precision-bored eye. Produced to tight bore concentricity and surface finish for linkage applications.
Anodised Aluminium Hub Pair
Blue hard-anodised aluminium hubs machined to tight bore and face runout tolerances. Lightweight design with cross-drilled spoke cutouts for drone and UAV applications.
Knurled Pin Cartridge
Precision-turned stainless steel pin cartridge with diamond knurl grip and slotted retention end. CNC turned with knurling and slotting in a single setup.
Brass Turned Connectors — Batch
High-volume batch of CNC-turned brass stepped connectors and pins. Turned from free-machining brass bar on sliding head lathes with consistent form and finish across thousands of pieces.
Chrome Flange Socket Housing
Polished chrome-plated turned flange socket housing with precision bore and face. CNC turned and plated to OEM specification for tight assembly clearance requirements.