Part Gallery
A showcase of our manufacturing capabilities across stampings, over-molded assemblies, and cable assembly production.
Retractor Bracket Assemblies
Stamped circular retainer frames with integrated spring-arm tensioners for automotive retractor systems.
Hydraulic Fitting with O-Ring Grooves
Precision-turned hydraulic/pneumatic fitting with triple O-ring grooves, threaded nose, and hex head. Machined from stainless steel bar to tight groove width and diameter tolerances for reliable sealing.
Machined Spool Components — Batch
Production batch of CNC-turned stainless steel spool components with concave waist profile. Complex turning profile produced efficiently on Swiss-type lathes with consistent dimensions throughout.
Precision Pin & Cartridge Assembly
Pair of CNC-turned stainless precision pin assemblies featuring threaded shank, knurled body, and conical tip with cross-slot. Tight runout and surface finish to OEM drawing requirements.
Precision Housings & Anodised Disc Flanges
Assorted precision components for electronics assemblies: CNC-machined chrome valve body, injection-molded plastic spherical and cylindrical housings, and anodised red/blue disc flanges machined to close bore and face tolerances.
CNC Machined Stainless Fittings & Couplings
Family of CNC-turned and milled stainless steel fittings for electronics enclosures and fluid/gas systems: threaded male connector, ported flange body, black anodised clamp ring, and threaded coupling — all produced to OEM drawing.
Multi-Bore Aluminium Indexer Plate
CNC milled aluminium indexer/turret base plate with precision-bored pocket array, slotted mounting feet, and threaded stud assembly. Complex 5-axis milling with tight positional tolerances on all bores.
Aluminium Block Housings & Mounts
CNC milled aluminium structural housings with precision-bored through holes and tapped mounting features. Produced from solid billet to tight squareness and bore position tolerances for electronics and sensor mounting applications.
Sheet Metal Chassis Frame
Stamped, formed, and assembled sheet metal chassis frame with welded nut inserts and assembled hardware. Produced for electronics device enclosures with tight overall flatness and mounting hole position requirements.
CNC Milled Stator Carrier
Complex CNC milled aluminium stator carrier with radial slot array, lobe tabs, and central bore. Produced for motor and generator electronics assemblies with tight slot-to-bore concentricity and angular pitch tolerances.
Aluminium Bearing Block & Cylindrical Housing
Pair of CNC milled aluminium housings: a flanged bearing block with precision-threaded bore and counterbore mounting faces, and a multi-groove cylindrical body with cross-drilled ports — both machined to OEM specifications.
Aluminium Heat Sink Panel
Extruded and machined aluminium heat sink panel with high-density fin array and machined mounting ears. Produced for electronics cooling applications where fin pitch, flatness, and mounting hole position are critical to thermal performance.
Turned Bushings — Batch Production
High-volume production batch of short precision-turned stainless bushings and sleeves in component tray. Tight bore diameter, OD, and length tolerances maintained across the full production run.
Hex Fittings with Insert — Batch
Batch of hex-body chrome fittings assembled with white plastic rod inserts, presented in production tray. Metal bodies CNC turned to close tolerances; inserts assembled to OEM specification.
Brass Threaded Insert Bushings — Batch
Batch of brass CNC-turned threaded cylindrical inserts with flanged head, arranged in segmented production tray. Thread form and OD tolerances consistent throughout the batch.
Brass Hex Knurled Fittings — High Volume Batch
High-volume production batch of brass hexagonal knurled fittings filling a full parts tray. Consistent hex across-flat, thread, and knurl dimensions maintained across thousands of pieces on CNC sliding head lathes.
Multi-Step Connectors — Segmented Tray
Batch of precision CNC-turned multi-step stainless connectors individually trayed for inspection and dispatch. Step diameters and overall length held to OEM drawing across all pieces.
Hex-Body Slotted Fittings — Batch
Batch of chrome hex-body fittings with internal collet slot feature, arranged in production tray. Hex across-flat and internal slot dimensions held to OEM tolerances for reliable tool engagement.
Brass Flanged Pin Assemblies — Batch
Production batch of CNC-turned brass flanged pin/stem assemblies in parts basket. Flange OD, stem diameter, and length tolerances consistent across the full batch for press-fit assembly applications.
Diamond-Knurled Domed Caps — Batch
Batch of large aluminium diamond-knurled domed cap nuts in parts basket. CNC turned with full-face knurl and consistent dome profile for hand-tightened enclosure and panel fastener applications.
Aluminium Fork Yoke Components — Batch
Batch of CNC turned and milled aluminium C-channel fork yoke components. Bore, slot width, and overall length tolerances maintained throughout the batch for linkage and clevis pin applications.
Conical-Tip Stainless Pins — Batch
High-volume batch of CNC-turned stainless steel conical-tip pins in parts basket. Tip angle, shank diameter, and length held to OEM tolerances across thousands of pieces.
Brass Threaded Insert Bushings — Segmented Tray
Batch of brass CNC-turned threaded cylindrical inserts with internal bore and flanged head, individually trayed. Thread form and bore diameter consistent throughout the batch.
Spool Components with Copper Washers — Batch
Batch of CNC-turned stainless spool components assembled with copper seating washers, in parts basket. Spool profile and washer seat dimensions consistent across the full production run.
Aluminium Turned Disc Flanges — Batch
Production batch of large CNC-turned aluminium disc flanges with smooth face and step. OD, face flatness, and step diameter tolerances consistent across all pieces in the batch.
Stainless Shoulder Bolts — Batch
Batch of CNC-turned stainless shoulder bolts with ground shank and threaded end in parts basket. Shoulder diameter, length, and thread form held to precision tolerances for bearing and pivot pin applications.
UAV Motor Bell Housing
Large black hard-anodised aluminium motor bell housing with ribbed outer profile and bolt-circle mounting flange. CNC turned and milled from 6061-T6 aluminium to tight cylindricity and flatness tolerances. Ribbed exterior provides passive heat dissipation for high-power UAV propulsion motors.
UAV Motor Rotor Disc — Stator Tooth Pattern
Precision CNC-turned and milled grey aluminium rotor disc with radial stator tooth array and central hub bore. Stator slot dimensions, bore concentricity, and face flatness held to close tolerances for low-vibration, high-efficiency UAV brushless motor assembly.
UAV Motor Rotor — 12-Spoke Cooling Disc
Large grey anodised aluminium UAV motor rotor with 12 aerodynamic swept spoke cutouts, integral stator teeth, and central boss. CNC milled from solid billet to OEM drawing with tight spoke width, bore, and flatness tolerances. Spoke geometry provides airflow for active motor cooling at high RPM.
UAV Component Assortment
Representative assortment of CNC-machined UAV and drone components: motor bell housing, spoke rotor disc, retention ring, threaded shaft assembly, knurled coupling, aluminium link bracket, and brass fittings. Demonstrates the breadth of precision turning and milling capability JHY Group delivers for UAV drivetrain and airframe applications.
Robotic Motor End Plate
Precision die-cast aluminium motor end plate for robotic joint actuators. Machined bearing seat and mounting holes to tight tolerances.
Precision Encoder Rings
Stamped and formed toothed encoder rings for robotic joint position feedback systems. Produced in matched sets to consistent pitch tolerances.
Annular Gear Ring
Precision stamped annular gear ring for robotic gearbox and harmonic drive assemblies. Tight concentricity and tooth profile tolerances throughout.
Precision Machined Shafts
Ground and finish-machined stainless steel shafts and spacers for robotic arm linkage and joint assemblies. Supplied in matched sets.
Brass Machined Connectors
CNC-turned brass connectors and fittings for robotic wiring harness and pneumatic systems. Threaded and assembled to OEM specifications.
Robotic Motor Housing Cover
Machined aluminium motor housing cover with precision-bored bearing register and bolt pattern for collaborative robotic arm joints.
CNC Sliding Head Lathe Production
Citizen sliding head CNC lathes running in our Taiwan facility. Multi-axis Swiss-type turning enables complex profiles, cross-holes, and threads in a single cycle.
High-Volume CNC Turned Pins
High-volume production of precision turned stainless steel pins and studs on CNC sliding head lathes. Tight diameter and length tolerances maintained across full production runs.
Multi-Groove Threaded Fitting
Polished multi-groove threaded connector assembly with bright chrome finish. CNC turned from bar stock with thread rolling for superior surface and fatigue resistance.
Machined Rod End / Eye Fitting
CNC-turned stainless steel rod end fitting with knurled shank and precision-bored eye. Produced to tight bore concentricity and surface finish for linkage applications.
Anodised Aluminium Hub Pair
Blue hard-anodised aluminium hubs machined to tight bore and face runout tolerances. Lightweight design with cross-drilled spoke cutouts for drone and UAV applications.
Knurled Pin Cartridge
Precision-turned stainless steel pin cartridge with diamond knurl grip and slotted retention end. CNC turned with knurling and slotting in a single setup.
Brass Turned Connectors — Batch
High-volume batch of CNC-turned brass stepped connectors and pins. Turned from free-machining brass bar on sliding head lathes with consistent form and finish across thousands of pieces.
Chrome Flange Socket Housing
Polished chrome-plated turned flange socket housing with precision bore and face. CNC turned and plated to OEM specification for tight assembly clearance requirements.
Seat Rail Slider Components
Elongated roll-formed rails and locking-claw mechanisms for automotive seat track adjustment.
U-Bolt Wire Forms
Precision-bent U-form wire components in natural steel and zinc-plated finishes.
Seat Belt Guide Loop Brackets
Formed D-ring and guide loop brackets in black powder-coat, used in occupant restraint routing.
Retractor Base Plates
Complex multi-fold base plates with serrated locking rings, stamped and formed in one progressive die.
Latch Carrier Brackets
Small black-oxide formed brackets with integrated eyelets for buckle and latch carrier applications.
Pillar Loop Anchor Hardware
Steel pillar loop anchors in raw, zinc and black-oxide finishes across multiple load specifications.
Buckle End-Cap Housings
Deep-drawn and plated cap components that enclose and protect seat belt buckle assemblies.
Seat Track Rail System
Powder-coated channel rail pairs with retainer clip sub-assemblies for automotive seating.
Stamped Mounting Bracket Set
Multi-part family of stamped and plated mounting plates and formed brackets for restraint systems.
Formed Wire Loop Assembly
Wire-form loop components with formed-end terminations, used in seat belt and restraint assemblies.
Seat Belt Hardware Assortment
Representative stamped steel bracket and plate family spanning multiple model fitments.
D-Rings & Pillar Loops
Polymer over-molded D-ring and pillar loop guides across multiple OEM vehicle anchor profiles.
Over-Molded Anchor Plates
Injection over-molded anchor plates in black and tan, meeting FMVSS 209 restraint standards.
Safety Seat Buckle Cables
Wire-rope cable assemblies with formed-end fittings for child safety seat buckle actuation.
Crimp Terminal Cable Set
Sheathed cable assemblies with precision-machined crimp lug terminals in multiple end configurations.
Server Rail & Slide Assemblies
Precision-machined telescoping rail and slide assemblies used for mounting servers and GPU compute chassis in data center racks.
GPU Server Chassis Frames
Multi-bay structural chassis frames engineered to house high-density GPU compute modules for AI server infrastructure.
Stamped Parts Family
Broad family of precision-stamped and formed metal components spanning brackets, channels, housings, and retainer discs across multiple part programmes.
Formed Hook Plate
Single-piece stamped and deburred hook plate with dual mounting apertures, used in belt routing and load-transfer assemblies.
Triangle Anchor Hooks
Heavy-gauge stamped triangle loop hooks with integrated mounting holes for occupant restraint and load-bearing anchor applications.
Die-Cast Structural Brackets
Die-cast aluminium and machined structural brackets and linkage arms for high-load aerospace body and safety system applications.
Forged Retractor & Buckle Bars
Precision-forged bar and tube retractor components alongside a formed buckle frame, supplied in raw and surface-treated finishes.
Precision Threaded Fasteners
Turned and forged shoulder bolts, flat-head screws, and stud assemblies in polished stainless steel to tight dimensional tolerances.